Specification
Dental Flowable Composite Light Cure Resin
1Kit contains 1 Syringe+1 tips
Resin Weight: 2.5 grams/Syringe
Available Color:A1,A2,A3,A3.5,B1
Storage:15-20℃
Feature
1.Class I-V fillings
2.Form and colour corrections
3.Diastema closure
4.Milk tooth restorations
5.Correction of developmental dental defects (e. G. Enamel dysplasia)
6.Splinting of teeth loosened through trauma
Cautions
1. Must not use phenols, clove oil, zinc oxide as the first layer of the bottom material,
because clove oil contains polymer inhibitor "phenol", and directly affect the degree of
polymerization of composite resin.
2. Acid treatment to do a good job of lips, teeth and adjacent teeth isolation protection,
should avoid contact with the eyes, mucous membranes and skin.
3. During curing operation, the distance between the lamp surface and the composite
material should be kept below 2mm, but not in contact with the material. Curing time is shown
in the table.
4. Before filling with adhesive and composite resin, the tooth body should deal with the
surface pollution of water and other impurities.
Storage
1. the use of the environment: the product should be operated at room temperature
23*C±2°C environmental conditions.
2. Storage conditions: The product should be stored in a cool and dry place between 10°C
and 25°C, and avoid direct light exposure.
3. shelf life: this product is valid for three years, do not use expired products.
4.For Dental USE ONLY
